Electrical Fuses - Mercedes-Benz EQB 2022 Operator's Manual

336 Breakdown assistance
Fitting and removing the towing eye
Press the mark on cover 1
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
After removing the towing eye, secure the
#
cover 1
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
Tow-starting the vehicle
If the drive system does not start, have the
#
vehicle transported to a qualified specialist
workshop, e.g. a Mercedes-Benz Service
inwards and
Centre.
The drive system cannot be started by tow-
#
starting the vehicle. Do not make any
attempts to tow-start the vehicle.
in the bumper.

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.
* NOTE Damage due to incorrect fuses
Using incorrect fuses can result in damage to
electrical components or systems or their
functions being considerably restricted.
Use only fuses approved for Mercedes-
#
Benz with the respective specified fuse
rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognise by the col-