Operating The Climate Control System - Mercedes-Benz EQB 2022 Operator's Manual

154 Climate control
7
g Switches air-recirculation mode on/off
( page 155)
/
8
¿ Switches the A/C function on/off
( page 154)
/
9 & Activates/deactivates "Immediate pre-
entry climate control" ( page 157)
/
A w Sets the temperature on the front
passenger side

Operating the climate control system

Switching climate control on/off
To switch on: set the airflow to level 1 or
#
higher using the H button.
To switch off: set the airflow to level 0 using
#
the H button.
%
When the ECO drive program is activated, the
climate control functions are restricted to
increase the range. This can have an effect on
the warming or cooling of the vehicle interior.
In the ECO drive program, the windows may
also mist up faster in heating mode
( page 169).
/
%
If climate control is switched off, the windows
may mist up more quickly. Switch off climate
control only briefly.
Switching the A/C function on/off using the air
conditioning control panel
The A/C function heats, cools and dehumidifies
the vehicle's interior air.
Press the ¿ button.
#
Switch off the A/C function only briefly; other-
wise, the windows may mist up more quickly.
Condensation may drip from the underside of the
vehicle when cooling mode is active. This is not
indicative of a fault.
Calling up the air conditioning menu
Calling up the air conditioning menu using the
multimedia system
Select one of the temperature displays at the
#
lower edge of the media display.
Calling up the air-conditioning menu using the
button on the climate control panel
Press the A button on the climate control
#
panel.
Activating/deactivating the A/C function via the
multimedia system
Multimedia system:
Climate menu First row of seats
4 5
The A/C function heats, cools and dehumidifies
the vehicle's interior air.
Select A/C.
#
Setting climate control to automatic mode
In automatic mode, the set temperature is con-
trolled and maintained at a constant level by the
air supply.
Press button à .
#
To switch to manual mode: press the _ or
#
à button.