Electronic Suspension Ad- Justment Esa Oe; Electronic Suspension Adjustment; Esa Oe - BMW R 1200 GS 2008 Rider's Manual

Tyre pressure outside permit-
ted tolerance.
A warning is also issued if tyre
pressure drops sharply but stays
within the permitted tolerance.
Temperature
compensation
Tyre pressure is a temperature-
sensitive variable: pressure in-
creases as tyre temperature rises
and decreases as tyre temper-
ature drops. Tyre temperature
depends on ambient temperat-
ure, on the style of riding and the
duration of the ride.
The tyre-pressure readings
shown by the multifunction
display are temperature-
compensated; the reference tyre
temperature for these readings
is always 20 °C. The air lines
available to the public in petrol
stations and motorway service
areas have gauges that do not
compensate for temperature; the
reading shown by a gauge of
this nature is the temperature-
dependent tyre pressure. In
most instances, therefore, these
gauge readings will not tally with
the pressures shown by the
multifunction display.
Pressure adaptation
Compare the RDC readings
on the multifunction display
with the value in the table on
the inside cover of the Rider's
Manual. Then use the air line to
compensate for the difference
between the RDC reading and
the value in the table.
Example: According to the Rider-
's Manual, tyre pressure should
be 2.5 bar, but the reading in the
multifunction display is 2.3 bar,
so pressure is low by 0.2 bar.
The gauge on the air line shows
2.4 bar. You must now increase
tyre pressure by the 0.2 bar dif-
ference between the value in the
table and the RDC reading; when
the air-line gauge shows 2.6 bar,
the tyre is inflated to the correct
pressure.
Electronic Suspension
Adjustment ESA
Adjuster, spring preload
In order to ensure rapid adjust-
ment at ambient temperatures
below 0 °C, BMW Motorrad re-
commends adjusting the sus-
pension to the setting for two-up
riding and allowing adjustment to
complete before your passenger
mounts the motorcycle.
The ESA indicator continues
to flash until adjustment com-
pletes. Do not attempt to move
the motorcycle until adjustment
has completed.
6
93
OE
z