4
60
The front seat can work
loose and wobble if the two
seat rods are not in the same
z
position.
Always be sure to install both
seat rods in the same position.
Introduce the seat rods in posi-
tion 4.
Seat set to high position.
Introduce the seat rods in posi-
tion 5.
Seat set to low position.
Install the front seat (
Windscreen
Adjusting windscreen
Slacken clamping screws 1 on
left and right.
Pivot the windscreen forward
or back to the desired position.
Make sure that clamping
screws 1 on left and right are
symmetrically positioned.
Tighten the clamping screws.
70)
Clutch
Adjusting clutch lever
If the position of the clutch
fluid reservoir is changed,
air can enter the clutch system.
Do not twist the handlebar fitting
or the handlebars.
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1 clock-
wise.