Table of Contents
Advertisement
Visually inspect brake pads 1
from the left to ascertain their
thickness.
Brake-pad wear limit, rear
1.0 mm (Friction pad only,
without backing plate. Make
sure that the brake disc is
not visible through the bore
in the inboard brake block.)
If the brake disc is visible:
Have the brake pads replaced
by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Brake-pad wear
The rear brake has a brake-pad
wear indicator.
Shaft 1 with three marker rings 2
is between the brake pads.
How to interpret the marks:
Three rings visible: brake-pad
thickness is at least 75 %
Two rings visible: brake-pad
thickness is at least 50 %
One ring visible: brake-pad
thickness is at least 25 %
No rings visible: brake pads
worn to wear limit; check as
described above
8
113
z
Advertisement
Table of Contents
