Table of Contents
Advertisement
Engage spring clip 4 in the
catch.
Install plug 3.
Turn cover 1 for high-beam
headlight clockwise to install.
Make sure that the wording
TOP is at the top.
Turn cover 2 for low-beam
headlight clockwise to install.
Make sure that the wording
TOP is at the top.
Replacing parking-light
bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Turn the handlebars all the way
to right
Pull bulb carrier 1 out of the
headlight housing.
Pull the bulb out of the bulb
socket.
8
127
z
Advertisement
Table of Contents
