Shipment And On-Site Transport; Accepting The Delivered Goods; Removing The Packaging From The Device; Transporting And Lifting The Actuator - Samson EB 8315 EN Mounting And Operation Instructions

4 Shipment and on-site trans-
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Check that
the specifications on the actuator name-
plate match the specifications in the de-
livery note. See the 'Markings on the de-
vice' section for nameplate details.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
3. Determine the weight and dimensions of
the units to be lifted and transported in
order to select the appropriate lifting
equipment and lifting accessories. Refer
to the transport documents and the 'Tech-
nical data' section.
4.2 Removing the packaging
from the device
Observe the following sequence:
Î Do not open or remove the packaging
until immediately before mounting the
device.
Î Leave the device in its transport container
or on the pallet to transport it on site.
EB 8315 EN

Shipment and on-site transport

Î Dispose and recycle the packaging in
accordance with the local regulations.
4.3 Transporting and lifting the
actuator
All versions of the Type 3379 Pneumatic
Actuator are delivered ready-mounted on
the valve.
Î See valve documentation for more
information on transporting and lifting
the entire control valve assembly.

4.4 Storing the actuator

All versions of the Type 3379 Pneumatic
Actuator are delivered ready-mounted on
the valve.
Î See valve documentation for more infor-
mation on storing the entire control valve
assembly.
4-1