Royal Sovereign ARP-2214P Manual page 12

Sleep Mode
While in cooling mode, press the sleep button to set the temperature. It will increase 1°C after
an hour and at most increase 2°C after 2 hours.
Auto Swing Mode
• Press this button to have the louver automatically swing continuously up and down.
• Press the button again to turn off Auto Swing function.
Water Drainage
Water Full Alarm
The internal water tank in the air conditioner has a water level safety switch. When water level
reaches or exceeds an anticipated height, the water full indicator light will turn on. This may
happen in high humidity environmental conditions. In order for the unit to resume operation it
must be draine.
To Drain Manually
1. Turn off the power to the unit and unplug.
The unit has two locations for water draining, one in the middle and the other at the bottom.
2. Place a water tray under the drainage port at the middle of the unit to collect water.
3. Remove the rubber drainage plug and allow water to drain.
4. Replace the plug, when drainage water stops flowing.
5. Repeat step 2 -4 for the bottom location.
Built into this unit is self-evaporating drainage feature. Under normal operating conditions, the
self-evaporative feature of the unit will operate without issue or maintenance being required.
However, in high humidity conditions, you may need to drain manually water from the unit.
(Ft error) You may also choose to do continuous drain option, which would drain water
automatically from the unit. (in dehumidifier mode)
-11-
ARP-2214P