Setting The Focus - Sennheiser XSW IEM Series Instruction Manual

61

Setting the FOCUS

In stereo mode, the FOCUS function controls the signal re-
ceived from the transmitter at the receiver.
The FOCUS setting has no function in the mono conf i gu -
ration.
The signals at the receiver are reproduced either as mixed
mono signals (FOCUS ON) or as mixed stereo signals (FOCUS
OFF).
Setting range:
• ON
• OFF
To switch FOCUS on or off:
Press the SET button repeatedly until the FOCUS display
▷
flashes.
Press the UP or DOWN button to change the set values.
▷
Press the SET button
▷
• briefly to temporarily save the settings and move to the
next menu item
• for two seconds to immediately save the changes and
exit the menu
Using the devices