Sennheiser XSW IEM Series Instruction Manual page 67

66
Panorama setting
In the PAN menu item, you can control the volume distribution
of an audio signal over two channels.
In stereo mode, the FOCUS function controls the signal re-
ceived from the transmitter at the receiver. In the mono
conf i gur ati on , FOCUS has no function.
Setting range:
• --
• L1 to L9
• R1 to R9
To adjust the balance/focus:
Press the SET button repeatedly until the PAN display
▷
flashes.
Press the UP or DOWN button to change the set values.
▷
Press the SET button
▷
• briefly to temporarily save the settings and move to the
next menu item
• for two seconds to immediately save the changes and
exit the menu
Using the devices