2.
Rack Installation Specifications
Rack Installation Requirements
●
Installing 4U DEs in the Same Rack (When Two Controllers Are Installed)
This section describes a connection configuration in which all of the enclosures are installed in the same rack.
The following figure shows an example for installing one controller enclosure and four high-density drive enclo-
sures (4U) in a rack.
For this type of configuration, connections between enclosures can be performed with the cables that are provi-
ded with the drive enclosures. Obtaining extra extension cables for reverse cabling is not required.
Figure 28 Connection Example 4 (4U DE Connections in the Same Rack)
DE#04 (4U)
DE#03 (4U)
DE#02 (4U)
DE#01 (4U)
Cables that are supplied as standard
2.5m
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Site Planning Guide
CE
Copyright 2021 FUJITSU LIMITED
51
P3AM-7632-18ENZ0