2. Rack Installation Specifications
Rack Installation Requirements
■
Connection Example (ETERNUS DX8100 S4)
The following figure shows an example of when one controller enclosure and one drive enclosure (2U) are
installed in a rack.
For the ETERNUS DX8100 S4, the required length of cable is the same for Controller 0 (CM#0) and Controller 1
(CM#1) so the cables that are supplied as standard can be use for connections.
Figure 44
Example of a Backend Cable Connection (ETERNUS DX8100 S4 Connections in the Same Rack)
Base rack (rear)
DE
CE
SCCI
PDU#1
PDU#0
: Cables that are supplied as standard (1.1m)
64
Site Planning Guide