Puk Codes; Barring Password; Wallet Code; Configuration Settings Service - Nokia 6230i User Manual

switched on. See
page 69.
• The PIN2 code may be supplied
with the SIM card and is
required for some functions.
• The module PIN is required to
access the information in the
security module. See
module" on page 100. The
module PIN is supplied with the
SIM card if the SIM card has a
security module in it.
• The signing PIN is required for
the digital signature. See
"Digital signature"
page 101. The signing PIN is
supplied with the SIM card if
the SIM card has a security
module in it.
If you enter an incorrect PIN code
three times in succession, the
phone may display
PIN code blocked
enter the PUK code.

PUK codes

The personal unblocking key (PUK)
code (8 digits) is required to
change a blocked PIN code. The
PUK2 code is required to change a
blocked PIN2 code.
If the codes are not supplied with
the SIM card, contact your local
service provider for the codes.
"Security" on
"Security
on
PIN blocked or
and ask you to
Copyright © 2006 Nokia. All rights reserved.
G e n e r a l i n f o r m a t i o n

Barring password

The barring password (4 digits) is
required when using the
barring service. See
page 69. You can obtain the
password from your service
provider.

Wallet code

The wallet code (4 to 10 digits) is
required to access the wallet
services. If you enter an incorrect
wallet code three times in
succession, the wallet application
is blocked for 5 minutes. If you
give three more incorrect entries,
the time doubles. For further
information, see "Wallet"
page 86.
■ Configuration
settings service
Before you use multimedia
messaging, instant messaging and
presence, push to talk, e-mail
application, synchronization,
streaming, and the browser, you
must have the proper
configuration settings on your
phone. You may receive the
settings directly as a configuration
message, which you save to your
phone. For more information on
availability, contact your network
Call
"Security" on
on
11