Charge The Battery; Memory Card Installation - Nokia 6086 User Manual

Nokia 6086: user guide
Hide thumbs Also See for 6086:
Table of Contents

Advertisement

Available languages

Available languages

G e t s t a r t e d
6. Replace the battery, by positioning it (with the
label side facing up), so the gold-colored contacts
match up with those on the phone. Slide the battery
in until it snaps into place.
7. Slide the back cover until it locks into place.

■ Charge the battery

1. Connect the charger to a standard
wall outlet.
2. Insert the charger plug into the round
jack in the bottom of the phone. If the
battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or
before any calls can be made.
3. Disconnect the charger from the phone
when the battery is fully charged.
You can use the phone while the charger is connected. The charging time depends
on the charger and the battery used. For example, charging a BL-5C battery with
the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is
in the standby mode.

■ Memory card installation

Keep all microSD memory cards out of the reach of
small children.
Use only compatible microSD cards approved by Nokia for use with this device.
Nokia uses approved industry standards for memory cards, but some brands may
not be fully compatible with this device. Incompatible cards may damage the
card and the device and corrupt data stored on the card.
You can use a memory card to extend the memory of the Gallery. See "Gallery,"
p. 46. You can insert or change the memory card without turning the phone off.
12

Advertisement

Chapters

Table of Contents
loading

Table of Contents