Call; Phone - Nokia 6086 User Manual

S e t t i n g s
To activate the memory card for data transfer or picture printing, connect the data
cable; when the phone displays
and one of the following options:
Nokia mode — to use the cable for Nokia PC Suite
Music sync — to sync your phone with the music files on your compatible PC
Data storage — to activate the memory card for data transfer
To change the USB mode, select
cable > Nokia mode,

■ Call

Select Menu > Settings
Call forwarding — to forward your incoming calls (network service). Call forwarding
and call restrictions cannot be active at the same time. See
"Security," p. 73.
Anykey answer > On
except the left and right selection keys, volume key, camera key, or the end key.
Answer when fold is opened
open the fold. If the setting is off, you must press the call key after you open the fold.
Automatic redial >
connect the call after an unsuccessful call attempt.
1-touch dialing > On
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
Call waiting > Activate
while you have a call in progress (network service). See "Call waiting," p. 22.
Summary after call
after each call.
Send my caller ID > Yes
(network service). To use the setting agreed upon with your service provider, select
Set by network.

■ Phone

Select Menu > Settings
Language settings >
If you select Automatic, the phone selects the language according to the
information on the SIM card.
70
USB data cable connected. Select
Menu
Music sync, or Data
> Call and one of following options:
— to answer an incoming call by briefly pressing any key,
> On — to set your phone to answer a call when you
On — to set your phone to make a maximum of 10 attempts to
— to dial the names and phone numbers assigned to the
— to set the network to notify you of an incoming call
> On — to briefly display the approximate duration of the call
— to show your phone number to the person you are calling
> Phone and one of the following options:
Phone language — to set the display language of your phone.
> Settings > Connectivity
storage.
mode., select OK
> USB data
Call restrictions in