Specifications - Pulse CLEI PBB1GF0D Manual

Power Node/30
1650, Issue 1, March 2011

5. SPECIFICATIONS

Table 3 lists the electrical, environmental, and physical characteristics of the Power Node/30. Figure 7 shows
temperature-compensated float voltages.
Electrical
Input voltage
a) Nominal
b) Range
Input power, maximum (including battery heater)
Output voltage, nominal
Battery float voltage, nominal (see Figure 7)
Ripple, maximum
Output current, maximum
Efficiency, minimum
Heat dissipation at full load
Line/load regulation (95 to 132 VAC input)
Low voltage disconnect (nominal)
Environmental
Temperature range
a) Operating (outside ambient)
b) Storage
Relative humidity, no condensation
Physical
Dimensions (height x width x depth)
a) Overall cabinet
b) Cabinet without mounting tabs
Weight
a) Power Node/30 without mounting hardware
b) Power Node/30UF without mounting hardware
a) PN-POLE-STABILIZER
b) Power Node with batteries and with
PN-POLE-STABILIZER
Table 3. Power Node/30 Specifications
Description Specification
115 VAC, 60 Hz
95 to 132 VAC
625 Watts
– 54 VDC at 20°C (68°F)
– 54.5 VDC at 20°C (68°F)
40 mVrms
6 Amperes
80% full load
80 Watts
5%, minimum to maximum current
– 42.0 VDC
–40° to +46°C(–40° to +115°F)
–40° to +46°C(–40° to +115°F)
Up to 95%
20 x 25 x 12 in (50.8 x 63.5 x 30.5 cm)
20 x 20 x 12 in (50.8 x 50.8 x 30.5 cm)
63 pounds (28.6 kilograms)
64 pounds (29.0 kilograms)
12 pounds (5.4 kilograms)
190 pounds (86.2 kilograms)
14