Installation Of Nokia Cdma Modem Driver - Nokia 2116 User Manual

U s i n g y o u r N o k i a C D M A p h o n e a s a m o d e m
• Select "Install the software
automatically (Recommended)"
then click Next.
• Computer will search for newly
installed driver. If any error
messages are displayed, click
Continue anyway.
• Click Finish to complete the
DKU-5 or CA-42 data cable
installation.
■ Installation of Nokia
CDMA Modem Driver
• Before installing the modem
driver, you need to know the COM
port used by DKU-5 or CA-42
data cable. To check the COM
port used, click Start > Control
Panel > Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select System > Hardware >
Device Manager.
• Click Ports (COM & LPT). If Port
1 on Nokia Adapter indicates
COM5, then select COM5 during
installation of the modem driver.
COM port used by DKU-5 or
CA-42 data cable can be
different on different computers.
In some computers, COM port
used will always change when
you disconnect DKU-5 or CA-42
data cable from the computer.
Therefore, before making any
78 Copyright © 2005 Nokia. All rights reserved.
Internet connection to Nokia
CDMA phones, please make sure
that Port used for modem is the
same port, as detected by Device
Manager.
• Modem installation will proceed.
Click Start > Control Panel >
Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select Phone and Modem
Options.
• On upper side, there are several
Tab options: Dialing rules,
Modems, Advanced.
• Select Modems, then Add, click
Don't detect my modem > Next
> Have Disk.
• Click Browse, then browse to
nmpCDMA_1x(USB).inf file that
you downloaded from
www.nokia-asia.com or
http://www.nokiausa.com/
phones/software/.
• Click OK.
• Select Nokia CDMA2000 1X 3G
Packet Data Modem, click Next.
• Select the same COM port as
detected by Device Manager,
and click Next > Continue
Anyway.
• Modem installation is completed.
Click Finish to complete modem
installation.