Remove The Battery; Uim (Cdma Sim) Card Installation - Nokia 6265 User Manual

9244301_6265_2_en_in_tat.fm Page 7 Tuesday, April 25, 2006 4:44 PM
2. Slide the back cover toward the
bottom of the phone, lift up and
remove.

Remove the battery

After you have removed the back
cover, insert your finger into the finger
grip, and lift the battery from its
compartment.
UIM (CDMA SIM) card
installation
The User Identity Module (UIM),
also called the CDMA Subscriber
Identity Module (SIM), card and its
contacts can be easily damaged by
scratches or bending, so be careful
when handling, inserting, or removing
the card. The UIM card slot is built into
the mechanics, located under the
battery.
S e t u p y o u r p h o n e
Before installing the UIM card, always
make sure that the phone is switched
off and that you have removed the
cover and battery.
Keep all UIM cards out of the reach of
small children.
1. Open the UIM holder by pressing
the release button.
2. Pivot the holder up.
3. Insert the UIM card into the holder
(beveled corner last) with the
gold-coloured contacts facing
down, matching up with the gold-
coloured contacts on the phone.
7