Add A Voice Command; Activate A Voice Command; Voice Command Options; Enhancement Settings - Nokia 2116 User Manual

Add a voice command

Before using a voice command, you
must add the command to the
device function.
1. In the standby mode, select
> Settings > Voice
2. Select the device function you
wish to tag: Profiles,
mailbox, Voice
register.
3. If necessary, select an option
associated with that function,
and select Options
command.
4. Select Start, and speak the voice
command clearly into the
microphone.
Do not select Quit
to cancel the recording.
The device replays then saves the
recorded command.
next to functions that have voice
commands assigned.

Activate a voice command

After you have associated a voice
command with a device function,
you can request the function by
speaking the voice command.
1. In the standby mode, select and
hold Contacts.
Menu
commands.
Voice
recorder, or Call
> Add
unless you want
appears
Copyright © 2005 Nokia. All rights reserved.
2. When Speak now
voice command clearly into the
microphone.
When the device finds the voice
command, Found:
device plays the recognised voice
command through the earpiece. The
function you requested is activated.

Voice command options

After you have associated a voice
command with a function, select
one of the following options:
Playback—Listen to the voice
command.
Change—Change the voice
command.
Delete—Erase the voice command.

■ Enhancement settings

The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement.
In the standby mode, select
Settings > Enhancement settings
Headset, Handsfree, Loopset,
phone, or Charger
accessory.
S e t t i n g s
appears, say the
appears, and the
Menu >
>
Text
and the desired
55