3-1. ASSEMBLY
Assembly-1: Notes on Assembling the ST Block
Pass the harnesses to these claws.
Harness (SK-1003) (Orange)
Harness (SK-1002) (White)
Harness (SK-1001) (Pink)
Assembly-2: Notes on Assembling the RL Block
Adjust these positions.
Adjust this position.
RL-1023 Flexible Board
ILCE-3000K/3500J_L2
Assembly-3: Screw tightening sequence when assem-
bling the Radiation Plate (IM)
3
3
2
Radiation Plate (IM)
1
Assembly-4: IM Adjust Washer (A, B, C) putting position
MB N Frame Assy
3. ASSEMBLY
Assembly-5: Screw tightening sequence when assem-
bling the MB Charge Unit
2
2
1
1
MB Charge Unit
3
Assembly-6: Apply grease on the MB N Plate SP
G G-85
(J-6082-626-A)
3-1
Assembly-7: Notes on Assembling the Sheet (WS) (771)
Attach the Sheet (WS) (771) as shown in the figure.
Sheet (WS) (771)
A portion
Insert the A portion.
Gap
MB N Plate SP
Adhesive part
Sheet (WS) (771)
Adhesive part
(Back side)
B portion
Insert the B portion.
Space
Front Plate