Invacare ML4 User Manual page 18

Invacare® ML4, ML6, M9 Cylinder With Conserver
3. Position the cylinder assembly A so the outlet connection D is
pointing away from the user and any other person(s).
WARNING!
Risk of Injury
To reduce the risk of injury:
– DO NOT direct flow of oxygen at any person, or
flammable material when adjusting the flow dial E.
Turn the flow dial E to setting "Off".
4.
5. Remove the outlet connection cap, if present.
6. Attach a standard or high flow single lumen adult oxygen nasal
cannula with a maximum length of 2.1 m (7 feet) to the product's
outlet connection according to the cannula manufacturer's
instructions.
DO NOT use pediatric cannulas with this product.
18
DANGER!
Risk of Injury or Death
The cannula can cause tripping, falling, or other
injury if improperly positioned and secured. To
avoid injury or death:
– The cannula MUST be routed and secured
properly.
– DO NOT position the cannula around the neck.
Ensure the patient can move freely while wearing
the cannula.
– Avoid positioning cannulas across areas of high
foot traffic (i.e. aisles, doorways, hallways, etc.)
7. Place the cannula over your ears and position the prongs in your
nose as instructed by your Health Care provider or cannula
manufacturer.
8. Ensure there are no kinks or twists in the cannula tubing.
Turn flow dial E to the prescribed setting.
9.
WARNING!
– To avoid injury to patient, ALWAYS confirm
prescribed setting before administering to patient
and monitor flow on a frequent basis.
– Only use the Invacare Corporation carrying bag.
10. Breathe through the nose and feel a flow of oxygen as you inhale.
11. When finished using the cylinder assembly, turn the flow dial to
setting "Off".
1167432-B-00