High Power/Economy Operation - Mitsubishi SKM15ZSP-W User Manual

HIGH POWER/ECONOMY operation

■ When the air-conditioner is turned off, start the operation from Step 1. When the air-conditioner is running, start from Step 2.
Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensi es the operating power and initiates powerful cooling or heating operation for 15
minutes continuously. The remote control displays
NOTE
During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating, press the HI POWER/ECONO button again to cancel
the HIGH POWER operation.
HIGH POWER operation is not available during the DRY and
the program timer operations.
When HIGH POWER operation is set after ON TIMER
operation, HIGH POWER operation will start from the set time.
After HIGH POWER operation, the sound of refrigerant
flowing may be heard.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling
or heating. The unit operates 1.5 °C higher than the setting temperature during cooling or 2.5 °C lower than that during heating. The
remote control displays
NOTE
It will go into ECONOMY operation at the next time the
air-conditioner runs in the following case.
1 When the air-conditioner is stopped by ON/OFF button
during ECONOMY operation.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECONOMY operation.
3 When the operation is retrieved from SELF CLEAN
operation.
1
2
and the FAN SPEED display is disappeared.
and the FAN SPEED display is disappeared.
Press the ON/OFF button.
Press the HI POWER/ECONO button.
■
When the operating mode is AUTO, COOL or HEAT
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
(HIGH POWER) (ECONOMY)
■
When the operating mode is DRY or PROGRAM TIMER
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
(ECONOMY)
When the following operations are set, HIGH POWER operation
will be canceled.
1 When the HI POWER/ECONO button is pressed again.
(The operation mode will be changed to the ECONOMY
operation)
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER operation
has started.
Not operable while the air-conditioner is OFF.
When the following operations are set, ECONOMY operation
will be canceled.
1 When the HI POWER/ECONO button is pressed
again.
2 When the operation mode is changed from DRY to
FAN.
Not operable while the air-conditioner is OFF.
EN-17
No display
(Normal operation)
No display
(Normal operation)