High Power/Economy Operation - Mitsubishi SRK63ZK-S User Manual

HIGH POWER/ECONOMY operation

Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15
minutes continuously. The remote control
NOTE
• During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating,press the HI POWER/ECONO button again to
cancel the HIGH POWER operation.
• HIGH POWER operation is not available during the DRY
and the program timer operations.
• When HIGH POWER operation is set after ON TIMER
operation, HIGH POWER operation will start from the set
time.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or
heating. The unit operates 1.5°C higher than the setting temperature during cooling or 2.5°C lower than that during heating. The
remote control displays and the FAN SPEED display disappears.
NOTE
• It will go into ECONOMY operation at the next time the air-
conditioner runs in the following case.
1 When the air-conditioner is stopped by ON/OFF button
during ECONOMY operation.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECONOMY operation.
3 When the operation is retrieved from CLEAN or AL-
LERGEN CLEAR operation.
If the air-conditioner is not operating, point the remote control toward the air conditioner, and
1
Press the ON/OFF button.
2
Press the HI POWER/ECONO button.
• When the operating mode is AUTO, COOL or HEAT
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
(HIGH POWER)
• When the operating mode is DRY or PROGRAM TIMER
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
(ECONOMY)
displays and the FAN SPEED display disappears.
• When the following operations are set, HIGH POWER
operation will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER
• Not operable while the air conditioner is OFF.
• After HI POWER operation, the sound of refrigerant flowing
may be heard.
• When the following operations are set, ECONOMY operation
will be canceled.
1 When the HI POWER/ECONO button is pressed
2 When the operation mode is changed DRY to FAN.
• Not operable while the air conditioner is OFF.
– 14 –
(ECONOMY)
operation has started.
again.
No display
(Normal operation)
No display
(Normal operation)