Mitsubishi SKM15ZSP-W User Manual page 10

Name of each part and its function
Unit display section
Unit ON/OFF button
This button can be used for turning on/off
the unit when a remote control is not available.
Page 9
Remote control signal receiver
Accessories
Remote control
NOTE
Buzzer sound for remote control
Buzzer sound (PipPip) is produced when
preset temperature is set to 24 °C or,
AUTO operation mode is selected or,
automatic airflow is selected (except FAN mode operation).
Buzzer sound (Pip) is produced when
air-conditioner is turned off by pressing ON/OFF button (except SELF CLEAN operation).
Airflow setting
Pip Pip Pip Pip
Remote control
holder
Preset temperature
Pip
Pip
EN-8
Illuminates during operation.
Blinks slowly when SELF CLEAN operation
(3 seconds ON, 1 second OFF).
Blinks when airflow is stopped to
prevent blowing out of cold air in
heating operation. (1.5 seconds ON,
0.5 seconds OFF)
Illuminates during TIMER operation.
Wood screw × 2
(for remote control holder mounting)
Pip Pip Pip Pip
RUN light (green)
Page 18
Page 22
TIMER light (yellow)
Page 14-16
Battery × 2
(R03 (AAA, Micro))
Pip