Sleep Timer Operation; Off Timer Operation - Mitsubishi SKM15ZSP-W User Manual

SLEEP TIMER operation

■ The unit will stop automatically after the set time lapses.
The set temperature is automatically adjusted according to the lapse time in order to avoid too much cooling or heating.
Changing of set time
Set a new time by pressing SLEEP button.
How to cancel
Press the CANCEL button to turn off the SLEEP
display.

OFF TIMER operation

■ The unit stops automatically when the set time comes.
When the air-conditioner is turned off, start the operation from Step 1. When the air-conditioner is running, start from Step 2.
Changing of set time
Set a new time by using the OFF TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.
1
Press the SLEEP button.
■
If it is pressed while the unit is off
SLEEP TIMER operation starts with the previous operation settings, and the
air-conditioner is turned off after the set time lapses.
■
If it is pressed while the unit is running
The air-conditioner is turned off after the set time lapses.
Every time the button is pressed, the display changes as follows:
No display
(canceled)
Example: You prefer it to stop after 3 hours.
Set to
The timer light (yellow) is on.
The unit stops after the set time lapses.
NOTE
SLEEP TIMER cannot be set simultaneously with OFF TIMER.
Example: You prefer it to stop 22:30.
1
Press the ON/OFF button.
2
Press the OFF TIMER button.
OFF TIMER display
3
Press the or
Every time the button is pressed, the display is switched in the order of:
0:00 0:10 0:20
Every time the button is pressed, the display is switched in the order of:
0:00 23:50 23:40
Set at 22:30.
4
Press the OFF TIMER button.
The display changes from blinking to steady lighting and the setting is
complete.
The timer light (yellow) is on.
NOTE
The unit stops at the end of the set period of time.
Make sure to press the button within 60 seconds from the last operation
in step 3, otherwise the setting is not completed.
The current time is not displayed during OFF TIMER operation.
Different from SLEEP TIMER operation, automatic set temperature
adjustment is not done during OFF TIMER operation.
EN-14
... (Units of one hour)
is blinking.
button.
...
1:00 1:10 (Units of ten minutes)
... 23:00 22:50
(Units of ten minutes)
Page 16