Table of Contents
Advertisement
7
To Pump (Coleman® Fuel Bottle)
■ Make sure FUEL VALVE is fully "OFF"
■ Squeeze clips and remove black protective cap from bottle connection (Fig.
13).
■ Remove protective plug from end of hose and place the plug into the cap for
storage (Fig. 14 and 15).
■ Connect hose to bottle connection, making sure both clips are engaged in
groove (Fig. 16 and 17).
■ Pump approximately 20 full strokes (Fig. 18). Adequate air pressure is
important, do not over pump.
FIG. 12
FIG. 15
FIG. 18
(Fig 12).
FIG. 13
FIG. 16
English-9
FIG. 14
FIG. 17
Advertisement
Chapters
Table of Contents
