System - Theben LUXORliving System Manual

2 System

• All components of LUXORliving communicate via a bus connection according to the KNX
standard (KNX S-mode).
• The connection to the home network is via the LUXORliving IP1 system control centre.
This allows operation via the LUXORplay app.
• The system can be equipped with a maximum of 64 LUXORliving devices, which
includes system devices, sensors and actuators.
System devices
-
-
Sensors
-
-
-
-
-
Actuators
-
-
-
-
• For operation, conventional buttons are used. They are integrated into the system via
button interfaces/binary input. Control is always via button. Only for the "switch"
function you can chose between "button" and "motion detector" (switch).
Alternatively, operation can be carried out via the LUXORliving iON tactile sensors.
Also, the LUXORplay app (for iOS, Android, Windows-PC) can be used for operation.
Only one system control centre and one power supply are allowed to be installed in one system.
1
LUXORliving system manual
LUXORliving IP1 (system control centre),
LUXORliving P640 (power supply)
Weather station
Room sensors
Binary inputs
Button interfaces
iON tactile sensors
Switch actuators
Dimming actuators
Blind actuators
Heating actuators
1
System
4