Table of Contents
Advertisement
Appendix
9.2 Device update
To be able to carry out a device update, you must first switch to debug mode (chap. 9.1)
By pressing the displayed icon, LUXORplug starts checking the device software; each device in
the device list is checked for a new software update.
If a new software version is found, it can be selected and updated with the "Update devices"
button.
Depending on the device, a software update can take up to 50 minutes. If a device software is
up-to-date or has been successfully updated, a blue tick mark appears under "Firmware".
The process can be cancelled at any time with the "Cancel" button. The device then contains the
latest installed software.
CAUTION: A device update should only be carried out after consulting the Theben hotline.
LUXORliving system manual
97
Advertisement
Table of Contents
