7 Preparation – using the case as a LUXORliving
smart home system
The following preparations must be made for the training with the LUXORliving
smart home system:
The short network cable must be connected as shown.
Router IP1
Next, connect the training case to the power supply.
Connect the PC / laptop to the case's WiFi.
Start the LUXORplug software on the PC / laptop
(download latest version from
https://www.luxorliving.de/luxorplug/)
Start the exercises.
If the network cable is plugged in first, and then the case is connected to
the power supply, the following IP address will be assigned to IP1:
192.168.0.100. If this sequence is not followed, a different IP address from
the DHCP range may be assigned to IP1.
Important information
Default access data for LUXORliving IP1:
Username: admin
Password: admin
Manual for the case
Preparation – using the case as a LUXORliving smart home system
15