Preparing The Modem For Setup; When To Insert The Modem - Nextel iM1100 User Manual

Nextel im1100 wireless modem: user guide
Table of Contents

Advertisement

• The iM1100 Wireless Modem Application and Installation Software
CD-ROM (provided in your package)
• An IBM-compatible PC with:
- An Intel
- One of these operating systems installed:
Windows 95 B, Windows 98 Second Edition, Windows NT 4.0
Workstation (Service Pack 4, 5, or 6), or Windows 2000
Professional (Service Pack 1 or 2)
- Minimum 8 MB of addressable RAM
- CD-ROM or DVD drive
- 9 MB free hard-disk space
- Recommended: One of these modem installation wizards
installed: Softex, Inc. PC Card Controller for Windows NT, or
SystemSoft CardWizard 3.00.08
- Recommended: Mouse or compatible pointing device
• Nextel PacketStream or Nextel Online Dial-Up Service rate plan
If you need more detailed information on installation
requirements, refer to the ReadMe file included with the
iM1100 Application and Installation Software.

Preparing the Modem for Setup

Before setting up your iM1100 Wireless modem:
• Charge the battery. See "Charging the Battery" on page 2.
• Confirm that the SIM card is in place. See "Removing and Replacing a
SIM Card" on page 5.

When to Insert the Modem

If you are running Windows NT on your laptop, insert the iM1100 Wireless
Modem into the PCMCIA slot before powering up your laptop to start the
installation.
®
-compatible 586 (or higher) processor
N O T E
Setting Up Your Modem
7

Advertisement

Table of Contents
loading

Table of Contents