Charging The Battery - Nextel iM1100 User Manual

Battery
Your iM1100 Wireless Modem comes with a Lithium Ion battery. After
inserting the battery, you must charge it before installing the iM1100 Wireless
Modem Application and Installation Software.
Inserting and Removing the Battery
To insert the battery (see Figure 1):
1. Open the battery door by gently pushing the tab upward and taking it
off.
2. Insert the battery into the battery compartment. Push it all the way in.
3. Gently press the tab on the battery door and snap the battery door
back into place.
To remove the battery (see Figure 1):
1. Open the battery door by gently pushing the tab upward and taking it
off.
2. Release the battery by lifting it up slightly. The battery pops up
automatically.
3. Hold the sides of the battery with your fingers and gently pull it out.

Charging the Battery

The first time you charge the battery, it takes three hours. Subsequent charges
take about two and a half hours.
2
Figure 1. Battery