Powering On And Off - Motorola Sprint iDEN i580 User Manual

Digital multi-service data-capable phone
Hide thumbs Also See for Sprint iDEN i580:
Table of Contents

Advertisement

Getting Started
Removing the Battery
1 With the phone powered off, remove the battery
door.
2 Remove the battery by pushing it toward the
antenna and lifting it out.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
-4°F (-20°C).
6
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.

Powering On and Off

To power your phone on:
1 Open the flip.
2 Press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn off
calls and other transmissions. See
"Temporarily Turning Off Transmissions"
on page 195.
As your phone connects to the network, you will
see a connecting message. When the idle screen
appears, the phone is ready to use.

Advertisement

Table of Contents
loading

Table of Contents