Activating Your I3000Plus Phone; Powering On The Phone - Motorola i3000plus User Manual

Battery Charging Status
The battery strength indicator icon, found on your phone's display screen,
shows the charge amount remaining in the battery.
Icon Display
3
Charge Low Battery
Strength
A short, chirp-like sound indicates a low battery. This indicates that you have
approximately 5 minutes of talk time remaining.

Activating Your i3000plus Phone

Before you can begin using your i3000plus phone, it needs to be activated.
If your display reads No Service or doesn't change to the Ready screen when
you turn on your phone, Turning Your i3000plus Phone On/Off

Powering On the Phone

1 Extend the antenna.
2
Press and hold at the top of the phone until the status light glows red
and a tone briefly sounds.
3
When the Enter SIM PIN screen displays, enter your SIM PIN. (For
more information see "SIM Card Personal Identification Number
(PIN)" on page 17.)
NOTE: The default SIM card PIN is 0000. It is recommended that you
change your PIN to prevent fraudulent use of the SIM card
"Changing the PIN" on page 18
(see
Press A under "OK".
4
5
As your phone connects to and registers
with the network, you will see a wel-
come message. When the Ready screen
appears on the display, you are ready to
use your i3000plus phone!
16
4 5
40% 70%
).
www.motorola.com
6
Fully Charged