Installing The Measurement Software, Applications, And Help - Agilent Technologies N4011A Getting Started Manual

Installing the Measurement Software, Applications, and Help

Minimum PC
Requirements
NO TE
N4011A Getting Started Guide
The supplied N4010A Measurement Software, Applications,
and Operating Information CD- ROM contains all the
applications, software components, and help files needed for
the Test Set to perform Bluetooth and 802.11 a/b/g/n WLAN
device tests.
Refer to the minimum PC requirements listed in the N4010A
Wireless Connectivity Test Set Installation Guide.
Open the DVD box and refer to the Installation Guide
contained inside.
Use the Installation Guide and, after starting the CD- ROM,
the on- screen instructions to view, copy, and install the
Applications and Help Systems you require.
If your PC does not have autostart enabled, use Windows Explorer to
locate and double click the
CD-ROM.
If the .NET Framework 1.1 SP1 is not detected on your PC, a message is
displayed asking you to confirm its installation from the N4010A CD-ROM.
Confirm to continue. If the .NET Framework is not installed the Installer
halts and you cannot proceed.
Typically, a PC re-start is required following the N4010A WLAN Test Suite
installation. If you are installing both WLAN and Bluetooth components,
we recommend that you install the N4010A WLAN Test Suite first, and
install the Bluetooth components following the PC re-start.
When you have completed the configuration of your PC and
are ready to proceed, refer to the WLAN Test Suite Help for
all programming and measurement information.
Preparation and Installation
(autorun.exe) file on the
1
21