Table of Contents
Advertisement
4. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
4.
1.
2.
5. According to different faceplates,there are different
installations of access panel as below.
5.
1) K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
Access Panel Installation Methods:
There are four ways to install access panel:
Method one: Press from top
Method two: Remote plate installation: fix four plates
with screws
Method three: Remote installation of mask
Method four: Press from front: fix four plates with screws
1)
K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
A. Method one: Install mask when pressing from top.
Remove top plate, then install the mask on the top of
the tank, and tighten the screw to fix the mask to the
tank.
B.
1402749-T01-A
All manuals and user guides at all-guides.com
:
Screw
-16-
Connecting Pipe
Water Pipe
Method one:
Press from top
Suggested faceplate
Method three:
Remote installation of mask
Suggested faceplate
installation area
R1000mm
Air hose
Mask
Method two:
Remote plate installation
Pinch
plate
installation area
R1000mm
Air hose
Method four:
Press from front
Pinch plate
Finished
Air hose
wall
Suggested/
Cover,Top
80 3
Advertisement
Table of Contents
