Table of Contents
Advertisement
3. Drill four holes with diameter of 12mm and depth of 80mm
with churn drilling as shown, and fill in the holes with
expanding bolt cap and tighten the screw.
3.
12mm 80mm
4. Tighten the hexagonal long screw with medium Allen key
as shown in illustration A.
Tighten the screw of adjustable brackets with medium
Allen key as shown in illustration B, and tighten the long
screw with spanner.
NOTE: Ensure the tank to remain level.
4.
A
B
B. Floor Discharge Installation Method
B.
1. Three discharge pipe installation methods based on actual
situation: A, B, C, adjust position by screw driver. Snap
discharge pipe lower end into discharge port.
1.
1402749-T01-A
All manuals and user guides at all-guides.com
Discharge
Elbow
A B C
Discharge
Elbow
Discharge
Elbow
-7-
Expanding Bolt Cap
Screw
Washer
Expanding Bolt Cap
Loosen
Level
A
Spanner
Adjustable Bracket
Screw
B
A
Drain outlet
90mm
B
Drain outlet
110mm
C
Drain outlet
110mm
Washer
Screw
Hexagonal Screw
Tighten
Medinm Allen Key
Water Tank
Bracket
90mm, welding
Water Tank
Bracket
110mm
Water Tank
Bracket
110mm, welding
Advertisement
Table of Contents
