Unpacking The Boiler - Viessmann VITOCROSSAL 200 CI2 Series Installation Instructions Manual

Preinstallation

Unpacking the Boiler

10
The boiler is delivered on a wooden pallet.
Note: The boiler can be lifted by crane only while it is still
packed on the skid.
1. Remove packaging unscrew the transport brackets.
2. Position the ramp at the front of the boiler. Ensure that
there is sufficient room to unload the boiler from the
skid. The ramp length A is 50 in. (1270 mm) for CI2
models 399 through 1000, and 75 in. (1900 mm) for
CI2 models 1500 and 2000.
3. Using an open end wrench wind in the adjustable feet.
4. Roll the boiler off the pallet.
CAUTION
Do not push on the jacketing to remove the boiler from
the skid.
Note: The boiler is equipped with wheels to facilitate
unloading and placement of the boiler.
WARNING
The boiler can cause serious injury if it overturns.
At least 2 people are required to move the boiler. Roll the
boiler in a straight line.
Vitocrossal 200 CI2 Installation