Chapter 7 - Easy Setup; Easy Setup Console Screens; Accessing The Easy Setup Console Screens - Netopia 4752 2A4NA Administration Manual

This chapter describes how to use the Easy Setup console screens on your Netopia 4752 SDSL Integrated
Access Device. After completing the Easy Setup console screens, your device will be ready to connect to the
Internet or another remote site.

Easy Setup Console Screens

Using five Easy Setup console screens, you can:
Modify a connection profile for your device for the connection to your ISP or remote location
Set up the voice connection to your remote voice provider
Set up IP addresses and IP address serving
Password–protect configuration access to your Netopia 4752 SDSL Integrated Access Device

Accessing the Easy Setup console screens

To access the console screens, Telnet to the Netopia 4752 over your Ethernet network or physically connect
with a serial console cable and access it with a terminal emulation program. See
Session" on page 6-2
Note: Before continuing, make sure you have the information that your telephone service provider, ISP, or
network administrator has given you for configuring the Netopia 4752.
The Netopia Router's first console screen, Main Menu, appears in the terminal emulation window of the
attached PC or Macintosh computer when:
The Netopia 4752 is turned on
The computer is connected to the Netopia 4752
Telnet or the terminal emulation software is running and configured correctly
or "Connecting a Console Cable to Your Device" on page 6-3.
Easy Setup 7-1
"Connecting through a Telnet