NETGEAR RangeMax WPN511 User Manual page 37

b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-10
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the SSID that you
c. In the Security section, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the online document:
http://documentation.netgear.com/reference/enu/wireless/index.htm.
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
NETGEAR RangeMax Wireless PC Card WPN511 User Manual
enter exactly matches the SSID used by the access point
v3.0, January 2007
2-15