Note: To optimize throughput, connect to a network with a high-speed router or access
point, and a high-speed Internet connection. For more information about optimizing
wireless performance, and network bandwidth, see
Performance" on page 3-1
page
3-2.
If you right-click the
check mark enabling notification, as shown in
shown.
Figure 1-8
WPN511 LEDs
The two LEDs on the NETGEAR RangeMax Wireless PC Card WPN511 indicate the condition of
the wireless link.
Figure 1-9
LED 1
LED 2
Slow blink
OFF
Alternate
Alternate blink Looking for network association
blink
Slow blink
Slow blink
NETGEAR RangeMax Wireless PC Card WPN511 User Manual
and
"Optimizing Your Network Bandwidth" on
icon, you can disable the Internet notification feature by clearing the
Figure
Meaning
Power save mode (default from power up or reset)
Power LED goes ON; Network LED is OFF; then Power LED goes OFF and
Network LED goes ON
Associated or joined with network; no activity
v3.0, January 2007
"Optimizing Wireless
1-8. If you do so, then only the IP address is
LED 1 (Power)
LED 2 (Network)
1-9