Setting Up Wpa-Psk Security - NETGEAR RangeMax WPN311 User Manual

NETGEAR RangeMax Wireless PCI Adapter WPN311 User Manual

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.
1. Run the WPN311 Smart Wizard.
a. Make sure the WPN311 software is installed and the WPN311 is properly installed in a
PCI slot in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-7
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information
about wireless security, see the online document:
http://documentation.netgear.com/reference/enu/wireless/index.htm.
2-16
v3.0, January 2007