Enabling Wireless Security Features - NETGEAR WG311T Installation Manual

Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
Figure 3-4: Ad-Hoc Setting page
In the Start Ad-Hoc field, choose the wireless standard (802.11b or 802.11g) for your Ad-Hoc
4.
computer-to-computer network.
In the Channel field, Automatic should work. If you notice interference problems with another
5.
nearby wireless device, select a channel that is not being used by any other wireless networks
near your wireless adapter. Use the Networks tab page to identify the channels in use in your
area.
Click OK.
6.
Note: The channel number differs depending on the country. The connection speed automatically
defaults to the highest speed.

Enabling Wireless Security Features

You can strengthen the security of your wireless connection by enabling Wired Equivalent Privacy
(WEP) encryption of the wireless data communications. For more information on 802.11 wireless
security, see "Authentication and WEP" on page
In addition to the WG311T wireless security features, you should also configure appropriate LAN
network security features such as requiring a user name and password to access the shared
resources in your network.
The procedures below identify how to configure the WEP encryption settings of your NETGEAR
108 Mbps Wireless PCI Adapter WG311T.
3-8
B-2.
Configuration