Table of Contents
Advertisement
3) Install torque wrench on top of the fixture capstan using the 13/16" socket. Make sure that the torque
wrench is initially set to zero torque before placing it in the fixture. The torque wrench support should
be adjusted to hold the torque wrench level. The torque wrench support bolts should be tightened
sufficiently to prevent movement of the support when torque is applied. See Figure 3-30.
GSA 8X/GSM 85(A) Installation Manual
190-00303-72
Figure 3-30. Torque Wrench Placement
Page 3-19
Revision R
Advertisement
Table of Contents
