Advertisement
4 Setting Up
(1) Removal of a base unit front cover
1) Remove installation
screws on the front
cover 1 to remove
the front cover 1.
Front cover 1
(The number of screws of the
front cover 1 differs according
to the capacity.)
(2) Mounting a control unit on a base unit
Follow the procedure of the mounting procedure sticker applied on the base unit.
The mounting procedure sticker shows the unit as viewed from the left side.
2) Loosen the installation
screws of the front
cover 2.
Front cover 2
3) Pull the front cover 2 toward
you to remove by pushing an
installation hook on the right
side using left fixed hooks as
supports.
Installation hook
5
Advertisement
