Electrical Requirements - Brother GTX600 Quick Start Manual

Electrical Requirements

• Ensure that the proper electrical capacity is present and available for use.
• Ensure that the heat press is going to be put on its own dedicated circuits
that meet the power requirements as listed by the OEM. For example, there
are a few common items listed to the right.
• The heat press needs to be kept on its own dedicated breaker/circuit. If an
Air Fusion is purchased a compressor will also be needed and on dedicated
line.
• A Pretreatment machine can share an outlet as long as it has a low amperage
consumption such as a Schulze product.
• The GTX600 can not be hardwired and must require a plug. Plug is not
provided and must be available for installation tech.
• Brother provides a 6' cord in the Starter Kit
• 24/7 power supply will be required
I understand that proper electrical will need to be provided and available for the equipment being purchased. The equipment will need
to be wired and ready for use before the time of installation.
Electrical
Power
Requirements
Single-phase
200 V; 240 V
GTX600
50/60 Hz
Single-phase
Schulze IV
120-240 V,
50/60 Hz
Single-phase
MAXX2G120
120 V,
50/60 Hz
Three-phase
MAXX2G220
240 V,
50/60 Hz
Power
Consumptions
5 Amp max
2 Amp
15Amp
15Amp