PROGRAM NEW USER CODES
SECURITY NOTE: To insure privacy, this procedure should be repeated for both
of the factory pre-set codes
1. Unlock the safe with the first
factory pre-set (or current
active) code.
2. If correct code is entered, "OPEN"
will appear on the LCD panel, and
you will hear a chime tone
indicating the safe is unlocked.
3. Immediately enter " " then a new
4-8 digit code followed by the "#"
key. (if you use an 8-digit code,
you will not need to enter the "#"
key after.
4. If entered correctly, "IN" will appear
on blue display followed by a chime
and the new code number will
appear for 1 second.
Repeat this process to reprogram the second factory pre-set code.
Your new code is now ready to use and the previous code is erased from
memory. If you wish to change your new code, simply repeat the process
with current active user code(s) and enter new code(s).
OPEN SAFE WITH NEW USER CODES
Repeat the process described in STEP 3: UNLOCK AND OPEN SAFE,
substituting the new user code(s) for the factory preset user code(s)
1.
2.
3.
4.
7