SET CALENDAR AND CLOCK
Once batteries are installed and the control pad is powered, the next step is to
begin by programming the clock and calendar. READ ENTIRE DIRECTIONS
AND WRITE DOWN DATE/DAY/TIME BEFORE PROGRAMMING. NOTE: You
must enter all information without delays. If the light goes off, you must begin
programming again.
1. With the safe door closed and locked,
press the " " key followed by the "9" key.
The LCD readout will glow amber.
2. Enter the Year – 2 Digits
3. Enter the Month – 2 Digits
4. Enter the Date – 2 Digits
5. Enter the Day – 1 Digit (see chart below)
6. Enter the Hour – 2 Digits (see chart below)
7. Enter the Minutes – 2 Digits
DAY
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
When correctly entered, the LCD readout
will stop glowing and should display the
information you just programmed.
#
Hour
1
1:00 am
2
2:00 am
3
3:00 am
4
4:00 am
5
5:00 am
6
6:00 am
7
7:00 am
8:00 am
##
Hour
01
9:00 am
02
10:00 am 10
03
11:00 am 11
04
12:00 pm 12
05
1:00 pm
06
2:00 pm
07
3:00 pm
08
4:00 pm
5
1.
Example
2.
2020 =
3.
February =
4.
30
th
5.
Monday
6.
9:26 am
7.
9:26 am
##
Hour
09
5:00 pm
6:00 pm
7:00 pm
8:00 pm
13
9:00 pm
14
10:00 pm 22
15
11:00 pm 23
16
12:00 am
##
17
18
19
20
21
00