Lag/Port-Channel (802.3Ad) Commands; Port-Channel Staticcapability; No Port-Channel Staticcapability; Show Port-Channel Brief - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

LAG/Port-Channel (802.3ad) Commands

port-channel staticcapability

This command enables the support of port-channels (static link aggregations - LAGs) on the
device. By default, the static capability for all port-channels is disabled.
Default
Format
Mode

no port-channel staticcapability

This command disables the support of static port-channels (link aggregations - LAGs) on the
device.
Default
Format
Mode

show port-channel brief

This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
Mode
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Active Ports
8-16
Disabled
port-channel staticcapability
Global Config
Disabled
no port-channel staticcapability
Global Config
show port-channel brief
Privileged EXEC and User EXEC
This field displays whether or not the device has static capability
enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-channel, in
slot/port notation.
This field lists the ports that are actively participating in this port-
channel.
202-10009-01_060204
Switching Commands