Segment Switching and Bridging from 10/100 Mbps to
1000 Mbps
The Model GS504, as illustrated below, connects multiple power workgroups
and servers using high-speed gigabit fiber links. Each power workgroup is
anchored by a NETGEAR FS509 switch. Because each fiber link can be up to
525 m long, these workgroups can be located on separate floors or in different
buildings.
Key
9
PORT
Fast Ethernet Switch
10/100Mbps
Prepare the Site
Before you begin installing your switch, prepare the installation site. Make sure
your operating environment meets the operating environment requirements of
the equipment.
Characteristic
Requirement
Temperature
Ambient temperature between 0 and 40 C (32 and 104 F).
No nearby heat sources such as direct sunlight, warm air
exhausts, or heaters.
Operating humidity
Maximum relative humidity of 90%, noncondensing.
Ventilation
Minimum 2 inches (5.08 cm) on all sides for cooling.
Adequate airflow in room or wiring closet.
Operating conditions
At least 6 feet (1.83 m) to nearest source of electromagnetic
noise (such as photocopy machine or arc welder).
Power
Adequate power source within 6 feet (1.83 m).
Model GS504 4-Port Gigabit Switch Installation Guide
Server 1
2000 Mbps
100 Mbps
10 Mbps
4
PORT
Gigabit Fiber Switch
10/100Mbps
Model FS509
Switches
MODEL
FS509
Ethernet
9
PORT
Fast Ethernet Switch
10/100Mbps
PCs
PCs
Model RT328
Router
Server 2
Model GS504
Switch
igabit
Ethernet
MODEL
GS504SX
MODEL
FS509
Ethernet
9327FA