BenQ G Series User Manual page 61

You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor running
at its native resolution. To have the optimal display performance of each type of input sources,
you can use the
Display Mode
Display Mode on page 55
The image is displaced in one direction.
Download
Resolution
"
Adjusting the Screen Resolution
make adjustments based on these instructions.
Faint shadow from the static image displayed is visible on the screen.
• Activate the power management function to let your computer and monitor go into a low
power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
Power LED indicator
The LED indicator is white or orange.
• If the LED lights up in solid white, the monitor is powered on.
• If the LED is illuminated in white and there is a message
means you are using a display mode that this monitor does not support, please change the
setting to one of the supported mode. Download
Product support on page
the correct resolution, refresh rate and make adjustments based on these instructions.
• If the LED is illuminated in orange, the power management mode is active. Press any button
on the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary
support.
• If the LED is off, check the power supply mains socket, the external power supply and the
mains switch.
OSD controls
The OSD controls are inaccessible.
To unlock the OSD controls when it is preset to be locked, press and hold any key for 10
seconds.
OSD messages
A message
Out of Range
If there is a message
Out of Range
means computer compatibility caused by operating system or graphic card. The system will
adjust the refresh rate automatically. Just wait until the operating system is launched.
https://tm.by
Интернет-магазин TM.by
function to set a proper aspect ratio for the input sources. See
for details.
file from the website (see
". And then select the correct resolution, refresh rate and
3). Refer to "
Adjusting the Screen Resolution
on the screen during computer boot up process.
on the screen during computer boot up process, this
Product support on page
on the screen, this
Out of Range
file from the website (see
Resolution
3). Refer to
". And then select
Troubleshooting 61